Remigo
Search
Search
Dark mode
Light mode
Reader mode
Explorer
Home
❯
02_Service steps
❯
Interface and Battery
Interface and Battery
34 items under this folder.
Sep 30, 2026
IB-ASM-001 ASSEMBLY STEP 1 - Route motor cables
Sep 30, 2026
IB-ASM-002 ASSEMBLY STEP 2 - Install plastic cable duct
Sep 30, 2026
IB-ASM-003 ASSEMBLY STEP 3 - Insert battery pack
Sep 30, 2026
IB-ASM-004 ASSEMBLY STEP 4 - Install cable protection plastic
Sep 30, 2026
IB-ASM-005 ASSEMBLY STEP 5 - Install battery fixing plates
Sep 30, 2026
IB-ASM-006 ASSEMBLY STEP 6 - Tighten battery fixing screws
Sep 30, 2026
IB-ASM-007 ASSEMBLY STEP 7 - Connect motor cable to battery
Sep 30, 2026
IB-ASM-008 ASSEMBLY STEP 8 - Connect interface cables
Sep 30, 2026
IB-ASM-009 ASSEMBLY STEP 9 - Attach first bungee cord point
Sep 30, 2026
IB-ASM-010 ASSEMBLY STEP 10 - Clean sealing surfaces
Sep 30, 2026
IB-ASM-011 ASSEMBLY STEP 11 - Apply silicone to interface
Sep 30, 2026
IB-ASM-012 ASSEMBLY STEP 12 - Spread silicone on sealing surface
Sep 30, 2026
IB-ASM-013 ASSEMBLY STEP 13 - Install interface
Sep 30, 2026
IB-ASM-014 ASSEMBLY STEP 14 - Remove excess silicone
Sep 30, 2026
IB-ASM-015 ASSEMBLY STEP 15 - Secure interface with bungee cords
Sep 30, 2026
IB-ASM-016 ASSEMBLY STEP 16 - Check bungee cord position
Sep 30, 2026
IB-ASM-017 ASSEMBLY STEP 17 - Final silicone cleanup and curing
Sep 30, 2026
IB-CHK-001 CHECK STEP 1 - Inspect removed interface and connectors
Sep 30, 2026
IB-CHK-002 CHECK STEP 2 - Inspect battery pack and connectors
Sep 30, 2026
IB-DIS-001 DISASSEMBLY STEP 1 - Cut silicone around interface
Sep 30, 2026
IB-DIS-002 DISASSEMBLY STEP 2 - Remove charging connector
Sep 30, 2026
IB-DIS-003 DISASSEMBLY STEP 3 - Screw in interface removal tool
Sep 30, 2026
IB-DIS-004 DISASSEMBLY STEP 4 - Loosen interface
Sep 30, 2026
IB-DIS-005 DISASSEMBLY STEP 5 - Lift interface
Sep 30, 2026
IB-DIS-006 DISASSEMBLY STEP 6 - Disconnect interface connectors
Sep 30, 2026
IB-DIS-007 DISASSEMBLY STEP 7 - Disconnect charge connector
Sep 30, 2026
IB-DIS-007 DISASSEMBLY STEP 7 - Disconnect signal cable
Sep 30, 2026
IB-DIS-008 DISASSEMBLY STEP 8 - Disconnect motor cable from battery
Sep 30, 2026
IB-DIS-009 DISASSEMBLY STEP 9 - Remove battery fixing screws
Sep 30, 2026
IB-DIS-010 DISASSEMBLY STEP 10 - Remove battery fixing plates
Sep 30, 2026
IB-DIS-011 DISASSEMBLY STEP 11 - Remove battery pack
Sep 30, 2026
IB-DIS-012 DISASSEMBLY STEP 12 - Inspect power cables
Sep 30, 2026
IB-DIS-013 DISASSEMBLY STEP 13 - Remove plastic cable duct and cables
Sep 30, 2026
IB-DIS-014 DISASSEMBLY STEP 14 - Clean silicone from motor housing