IB-ASM-006 ASSEMBLY STEP 6 - Tighten battery fixing screws

Tools:

• T20 Torx driver

Consumables:

• Permabond A126 (010010004) (only if a screw does not grip, see caution below)

Installing parts:

• Screw M4x25 TX20 (ISO14581-M4X25-A4_TX20)

Procedure:

1. Install the four M4x25 screws into the housing channels.
2. Tighten the screws until the fixing plates compress the battery pack.

CAUTION

Stop tightening when the fixing plates visibly compress the battery pack. Do not overtighten.
Work with the housing in a horizontal position. A dropped screw can fall into the battery or motor cavity and cause a short circuit.
If a screw does not grip because the housing thread is damaged, secure it with Permabond A126 (010010004) instead of continuing to force it.