Tools:
Installing parts:
- PCBA Motor Controller (701010001)
- Screw M3x4 ZN (011010005)
- Screw M3x5 ZN (011010003)
- Washer 3,2-8-0,5 ZN (011030006)
Procedure:
- Bolt the phase terminals to the controller using M3x4 screws and washers.
- Bolt down the motor controller using M3x5 screws.
Torque specification:
- M3 screws: 1,3 Nm
CAUTION
The motor controller must only be handled in an ESD-protected environment. Use appropriate ESD protection to prevent damage to electronic components.