DT-ASM-007 ASSEMBLY STEP 7 - Install motor controller

Tools:

• T10 Torx driver

Installing parts:

• Screw M3x5 ZN (011010003)
• Screw M3x4 ZN (011010005)
• Washer 3,2-8-0,5 ZN (011030006)

Procedure:

1. Bolt the phase terminals to the controller using M3x4 screws and washers.
2. Bolt down the motor controller using M3x5 screws.

Torque specification:

• M3 screws: 1,3 Nm

CAUTION

Do not overtighten the screws. Follow the specified torque.